Skip to content

Roofing service

Ridge Capping Repairs & Re-Bedding Canberra & Queanbeyan

Complete ridge capping restoration for tiled roofs, including removal of failed bedding, re-bedding, realignment and flexible pointing.

Ridge capping repairs and re-bedding carried out by Limitless Roof Solutions in Canberra

Complete Ridge Capping Restoration

Ridge capping is an important part of a tiled roofing system and should generally be restored approximately every 15 years as part of ongoing roof maintenance. The condition and lifespan of the ridge system can vary depending on its original installation, weather exposure and previous repairs.

Cracked pointing is often the visible sign of a deeper problem. If the mortar bedding beneath the ridge caps has deteriorated or become loose, applying another layer of pointing over the top will not properly restore the ridge system.

Limitless Roof Solutions carries out complete ridge capping restoration throughout Canberra, Queanbeyan and surrounding regions. This involves lifting the ridge caps, removing the old bedding and pointing, preparing the tiles and rebuilding the ridge system correctly.

Signs Your Ridge Capping May Need Attention

  • Cracked, loose or missing flexible pointing
  • Loose or displaced ridge caps
  • Deteriorated or crumbling mortar bedding
  • Gaps beneath ridge or hip tiles
  • Previous pointing separating from the tiles
  • Water entry around ridge and hip lines
  • Ridge caps that are uneven or incorrectly aligned
  • A ridge system that has not been restored for approximately 15 years

Our Re-bedding and Pointing Process

  1. Lift and remove all affected ridge and hip tiles
  2. Remove the existing mortar bedding and flexible pointing
  3. Inspect the ridge caps and surrounding roof tiles
  4. Replace ridge caps or roof tiles that are damaged or unsuitable for reuse
  5. Mechanically prepare the edges of tiles to achieve a suitable surface for adhesion
  6. Clean and blow down the work area
  7. Install new mortar bedding
  8. Reset and correctly align the ridge caps
  9. Form weep holes through the bedding where required
  10. Allow the new bedding to set
  11. Apply flexible pointing along the sides and overlaps of the ridge caps
  12. Continue required weep holes through the flexible pointing
  13. Complete a final inspection of the restored ridge system

What's involved

  • Removal of existing ridge caps
  • Removal of failed bedding and pointing
  • Preparation and cleaning of adjoining surfaces
  • Replacement of damaged tiles where required
  • New mortar bedding
  • Correct realignment of ridge and hip tiles
  • Flexible pointing
  • Required weep holes
  • Final inspection

Our approach

  1. Inspection

    The ridge and hip lines are inspected along their full length, together with the surrounding roof tiles. This allows us to determine whether the issue is limited cracking in otherwise sound pointing or failure of the bedding beneath the ridge caps.

  2. Identify the Cause

    We assess whether the deterioration is due to age, failed bedding, loose ridge caps, poor adhesion, movement or defective previous repairs.

  3. Explain the Repair

    We explain what has failed, how much of the ridge system requires attention and whether a complete re-bed and point is recommended.

  4. Complete the Work

    The ridge caps are lifted, the old bedding and pointing are removed, and all reusable tiles are prepared. Damaged tiles are replaced before the ridge caps are reset on new bedding, correctly aligned and finished with flexible pointing.

  5. Final Inspection

    The completed ridge system is personally inspected by the owner and covered by our five-year workmanship warranty.

Repointing vs Complete Re-bedding and Pointing

Repointing involves applying new flexible pointing to an existing ridge system while leaving the ridge caps and mortar bedding in place. This may be suitable where the existing bedding remains solid, the ridge caps are secure and only the flexible pointing has begun to deteriorate.

A complete re-bed and point is a more thorough restoration. All ridge caps are lifted, the old bedding and pointing are removed, and the ridge system is rebuilt using new mortar bedding before flexible pointing is applied.

Why We Don't Simply Repoint Failed Ridge Capping

New pointing should not be used to conceal loose ridge caps or deteriorated mortar bedding. Although it may temporarily improve the appearance of the roof, it does not repair the failed foundation beneath the ridge caps.

Where the bedding has broken down, new pointing is only adhering to an unstable base and is likely to crack, separate or fail again.

By completing a full re-bed and point, we can inspect each ridge cap, remove defective materials, replace damaged tiles, restore correct alignment and rebuild the ridge system from its foundation. This provides a proper long-term repair rather than a cosmetic patch over existing failure.

Why choose Limitless Roof Solutions

  • Licensed roofing contractor

    NSW roofing contractor licence 487030C.

  • Certificate III qualified

    Certificate III in Roof Plumbing, completed in 2019.

  • Owner operated

    Every project is personally completed or inspected by the owner.

  • 5-year workmanship warranty

    Backed by a five-year workmanship warranty, fully insured.

Limitless Roof Solutions is built around quality rather than volume. Ethan brings both roofing and carpentry experience to every job and stays personally involved from the first inspection through to the final check. Read more about Ethan.

Service area

Ridge capping repairs and re-bedding are carried out across Canberra, Queanbeyan and surrounding regions, including Forrest, Red Hill, Deakin, Woden Valley, Weston Creek, Tuggeranong and Googong.

Related projects

  • Owner Completed & Inspected
  • Built to Applicable Standards
  • 5-Year Workmanship Warranty

Ridge capping cracked or moving?

Limitless Roof Solutions will assess the complete ridge system and recommend the repair the roof actually needs.